• Honeywell DF8M Smoke Detector

Honeywell DF8M Smoke Detector

£155.00 excl. VAT

  • Description

    tab 1

    Honeywell’s 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).

     

    The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system’s receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke – virtually eliminating nuisance alarms.

     

    Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist.

     

    All models also feature a restorable, built-in, fixed temperature (135°F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41°F.

     

    Features

    Improved Robust RF Field Strength
    The distance between the detector and receiver has been significantly increased without the need for a repeater

     

    Smoothing Algorithms
    Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke

     

    Smart Check
    A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.

     

    Drift Compensation
    Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity

     

    Removable Detector Cover and Chamber Top
    The technician is able to quickly and easily clean the detector chamber without disassembling the detector head

     

    Approved UL Listings for Residential and Commercial Applications
    Both residential and commercial installation requirements are met

     

    Additional LED Status Indicators
    Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.

     

    Easy-to-install Mounting Base
    The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports, which accommodate drywall anchors for easy surface mounting.

     

    ADDITIONAL FEATURES:

    • Utilizes one long-life 3V lithium battery
    • Microcontroller runs on a 4.0 MHz clock
    • Horn operates at 3.3 KHz with sound pressure level of 85 dBA at 10 feet
    • Built-in wireless transmitter, temporal code 3 sounder
    • Maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is approved by UL
SKU: 1756 Category: